Siemens SITRANS P DS III - Display; Display Elements

Operation
6.4 Display
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07
73
6.4
Display
6.4.1
Display elements
Structure
①
Measured value
⑤
Violation of lower limit
②
Unit/bar graph
⑥
Symbol for measured value
③
Root display
⑦
Violation of higher limit
④
Mode/button lock
⑧
Communication display
Figure 6-1 Display layout
Description
The display is used for the local display of the measured value ① with:
● Unit
②
● Mode
④
● Sign
⑥
● Statuses
⑤ and ⑦
The display
① outputs the measured value in a physical unit ② which can be selected by
the customer.
The
Violation of lower limit ⑤ and Violation of upper limit ⑦ displays are also referred to as
status since they have meanings dependent on the settings.
If the communication display
⑧ blinks, this indicates an active communication.