Siemens SITRANS P DS III - Flush-Mounted and Special Connection Drawings

Dimension drawings
14.4 SITRANS P DS III (flush-mounted)
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07
227
⑨
Connection side
⑩
Sealing plug with valve (optional)
1)
Take an additional 20 mm (0.79 inches) thread length into account
2)
Not with "flameproof enclosure" type of protection
3)
Not for "FM + CSA [is + XP]" type of protection
4)
For Pg 13.5 with adapter, approx 45 mm (1.77 inches)
5)
92 mm (3.62 inches) minimum distance for rotating the enclosure with display
Figure 14-4 Pressure transmitter SITRANS P DS III for level, including mounting flange, dimensions in mm (inches)
14.4
SITRANS P DS III (flush-mounted)
①
Key cover
⑤
Connection side
②
Blanking plug
⑥
Space for enclosure rotation
2)
③
Cover catch (only for flameproof enclosure)
⑦
Process connection
④
Cable gland
⑧
Electronics side, display (longer for cover with
inspection window)
1)
Take additional 20 mm (approx.) thread length into account
2)
92 mm (3.62 inches) minimum distance for rotating the enclosure with display
Figure 14-5 SITRANS P DS III (flush mounted)
The screen consists of a SITRANS P DS III with an example flange. On this screen, the
height is divided into H
1
and H
2
.
H
1
Height of the device up to a defined cut
H
2
Height of the flange up to this defined cut