Siemens SITRANS P DS III - Note 3 A and EHDG; Connections as Per en and ASME

Dimension drawings
14.4 SITRANS P DS III (flush-mounted)
SITRANS P DS III with PROFIBUS PA
228 Operating Instructions, 06/2013, A5E00053276-07
In the flange dimensions, only the height H
2
is specified.
14.4.1
Note 3A and EHDG
Note
Approvals
The references to the approvals for "EHEDG" and "3A" refer to the respective process
connections and are not device
-specific. Please refer to the technical data of the respective
transmitter to see whether the desired certificate is available for your devi
ce/flange
combination.
14.4.2
Connections as per EN and ASME
Flange as per EN
EN 1092-1
DN
PN
⊘D
H
2
25
40
115 mm (4.5'')
Approx. 52 mm (2'')
25
100
140 mm (5.5'')
40
40
150 mm (5.9'')
40
100
170 mm (6.7'')
50
16
165 mm (6.5'')
50
40
165 mm (6.5'')
80 16 200 mm (7.9'')
80 40 200 mm (7.9'')
Threaded connections
G3/4", G1" and G2" In accordance with DIN 3852
DN
PN
⊘D
H
2
¾"
63
37 mm (1.5'')
Approx. 45 mm (1.8'')
1"
63
48 mm (1.9'')
Approx. 47 mm (1.9'')
2'' 63 78 mm (3.1'') Approx. 52 mm (2'')