Siemens SITRANS P DS III - Page 212

Technical data
13.6 Construction
SITRANS P DS III with PROFIBUS PA
212 Operating Instructions, 06/2013, A5E00053276-07
Construction for gauge pressure, with flush mounted diaphragm
Mounting bracket
Steel or stainless steel
Measuring cell filling
• Silicone oil
• Neobee M20
• Inert liquid
Process connection
• Flanges as per EN and ASME
• F&B and Pharma flange, clamp and threaded connectors
• NEUMO BioConnect/BioControl
• PMC connections for the paper industry
Electrical connection Cable inlet using the following cable glands:
• Pg 13.5
• M20x1.5
• ½-14 NPT
• Han 7D/Han 8D plug
1)
• M12 connector
Torque for cable gland nut made of
Plastic
Metal
Stainless steel
2.5 Nm (1.8 ft lb)
4.2 Nm (3.1 ft lb)
4.2 Nm (3.1 ft lb)
Degree of protection for Han and
M12 connectors
IP65
1)
Han 8D is identical to Han 8U.
DS III construction with PMC connection
Weight
Approx. 1.5 kg (3.3 lb) for aluminum enclosure
Material
• Wetted parts materials
Gasket (standard)
PTFE flat gasket
O-ring (minibolt)
• FPM (Viton)
• FFPM or NBR (optional)
Seal diaphragm
Hastelloy C276, mat. No. 2.4819
• Non-wetted parts materials
Electronics housing
• Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision
casting, mat. no. 1.4408
• Standard: Polyester-based paint
Option: 2 coats: Coat 1: epoxy-based; coat 2: polyurethane
• Stainless steel nameplate
Mounting bracket
Steel or stainless steel
Measuring cell filling
• Silicone oil
• Inert liquid
Process connection