Siemens SITRANS P DS III - Page 214

Technical data
13.6 Construction
SITRANS P DS III with PROFIBUS PA
214 Operating Instructions, 06/2013, A5E00053276-07
Design for absolute pressure (from the differential pressure series), differential pressure and flow rate
Process connection
1
/
4
-18 NPT female thread and flat connection with
7
/
16
-20 UNF fastening screw
thread in accordance with EN 61518 or M10 fastening screw thread in accordance
with DIN 19213 (M12 for PN 420 (MAWP 6092 psi))
Electrical connection Screw terminals
Cable inlet using the following cable glands:
• Pg 13.5
• M20 x 1.5
• ½-14 NPT or Han 7D/Han 8D connector
1)
• M12 connector
Torque for cable gland nut made of
Plastic
Metal
Stainless steel
2.5 Nm (1.8 ft lb)
4.2 Nm (3.1 ft lb)
4.2 Nm (3.1 ft lb)
Degree of protection for Han and
M12 connectors
IP65
1)
Han 8D is identical to Han 8U.
Construction for level
Weight
• as per EN (pressure transmitter
with mounting flange, without
tube)
approx 11 … 13 kg (24.2 … 28.7 lb)
• as per ASME (pressure
transmitter with mounting flange,
without tube)
approx 11 … 18 kg (24.2 … 39.7 lb)
Material
• Wetted parts materials
Plus side
• Seal diaphragm on the
mounting flange
Stainless steel, mat. no. 1.4404/316L, Monel 400, mat. no. 2.4360, Hastelloy B2,
mat. no. 2.4617, Hastelloy C276, mat. no. 2.4819, Hastelloy C4, mat. no. 2.4610,
tantalum, PTFE, ECTFE
• Sealing surface
smooth as per EN 1092-1, form B1 or ASME B16.5 RF 125 … 250 AA for stainless
steel 316L, EN 2092-1 form B2 or ASME B16.5 RFSF for the remaining materials
Sealing material in the pressure
caps
• for standard applications
Viton
• for underpressure
applications on the mounting
flange
Copper
Minus side
• Seal diaphragm
Stainless steel, mat. no. 1.4404/316L