Siemens SITRANS P DS III - Page 222

Dimension drawings
14.1 SITRANS P, DS III for gauge pressure and absolute pressure from the gauge pressure series
SITRANS P DS III with PROFIBUS PA
222 Operating Instructions, 06/2013, A5E00053276-07
1)
Take an additional 20 mm (0.79 inches) thread length into account
2)
Not with "flameproof enclosure" type of protection
3)
Not for "FM + CSA [is + XP]" type of protection
4)
For Pg 13.5 with adapter, approx 45 mm (1.77 inches)
5)
Minimum distance for rotating
Figure 14-1 Pressure transmitter SITRANS P DS III for absolute pressure, from the gauge pressure series, dimensions in
mm (inches)