Operation
6.5 Local operation
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07
87
Table 6- 14 Unit for mass (M)
Table 6- 15 Unit for temperature (T)
Table 6- 16 Unit for user-specific (U)
arbitrary Max. 16 characters,
If more than 5 characters, the display shows the unit as a ticker.
The input of the characters to be displayed can only be performed through the
Note
The profile allows a much larger number of possible units. There is no limitation on some
physical values special to the output of the analog input function block. For instance, if you
have selected a un
it with SIMATIC PDM which does not appear in the corresponding valid
list, the current measurement value will be shown without a unit in the measured value
display.
Units of the pressure transducer block (Page 102)
To Next Page
Loading...
