SIGLENT
76 SDS1000CML+/SDS1000DL+ User Manual
2）Press the “Type” option button to select “setups”.
3）Press the “Save to” option button to select “Device”.
4）Press the “Setup” option button to select “No.1”.
5）Press the “DISPLAY” button to enter the “Display” menu.
6）Press the “Type” option button to select “Dots”.
7）Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” menu.
8）Press the “Save” option button.
Recalling setup, follow next steps:
1）Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” display menu.
2）Press the “Type” option button to select “Setups”.
3）Press the “Save to” option button to select “Device”.
4）Press the “Setup” option button or turn the “Universal” knob to select “No.1”.
5）Press the “Recall” option button.
To Next Page