General Information
22083083H 13
F1/2 NFU Remote
Handheld control for push button steering, fitted with a rubber grip. Made of
cast seawater resistant aluminium and fitted with a 10 meter (30 ft.) cable.
RI35 Mk2 Rudder Angle Indicator
The RI35 Mk2 is manufactured in non-corrosive aluminum with a non-
reflective black finish.
The indicator is made in standard modular size (132x108 mm) to match the
Simrad AP35 autopilot.
The instrument gives a continuous reading of the rudder position up to 45
degrees to each side of midship position. A front panel key is used for rudder
zero adjustment and illumination adjustment.
The splash proof construction allows panel, bulkhead or bracket mounting in
exposed locations, such as bridge wings as well as wheel house and engine
room.
Note ! See Figure 4-1 for illustrations or section 3 for technical specifications.
To Next Page
Loading...
Need help?
General
