Operation
22083083H 15
2 OPERATION OF THE AUTOPILOT
Caution ! An autopilot is a very useful navigational aid, but DOES NOT under any
circumstance replace a human navigator.
Do not use automatic steering when:
• In heavy traffic areas or in narrow waters
• In poor visibility or extreme sea conditions
• In areas where use of autopilot is prohibited by law
When using an autopilot:
• Do not leave the helm unattended
• Do not place any magnetic material or equipment near magnetic or
fluxgate compass used in the autopilot system
• Verify at regular intervals course and position of vessel
• Always switch to Standby mode, and reduce speed in due time to avoid
hazardous situations
2.1 Overview
Figure 2-1 AP35 Front Panel
The control unit shown above can operate as a stand alone unit in an
autopilot system or combined in a multistation system. In a multistation
system the command can easily be transferred from one unit to another.
Units not in control will display "Inactive".
The AP35 system is capable of the following primary steering modes: STBY
(manual steering), AUTO, NAV, WORK and TURN, each mode having a
dedicated push button.
Each of the mode push buttons is clearly identified with the primary function
in large text, and a secondary function listed in smaller text. Each button
provides you with the ability to access a primary display, a secondary
display and/or multiple function displays.
To Next Page
Loading...
Need help?
General
