Simrad AP35 - Figure 3-6 Rf300 Rudder Feedback - Dimensions; Figure 3-7 Transmission Link - Dimensions; RF300 Rudder Feedback Unit

Technical Specifications
22083083H 35
3.8 RF300 Rudder Feedback Unit
Dimensions:....................................See Figure 3-6 and Figure 3-7.
Weight: ...........................................0,5 kg (1,1 lbs)
Rudder angle: .................................± 90 degrees
Output signal: .................................Polarity independent frequency signal
Frequency resolution: .............Centre: 3400 Hz, 20 Hz/degree of change
Linearity: ± 3 degrees up to 45 degrees of rudder
Cable supplied:...............................10 m twisted pair shielded cable
Mounting: ......................................Horizontal, vertical, upside down
Material: ........................................Polyacetal (POM)
Environmental Protection:..............IP56
Temperature range:
Operation: ...............................–10 to +55 °C (+14 to +130 °F)
Storage:...................................–30 to +80 °C (–22 to + 176 °F)
Transmission link: ..........................Stainless 350mm (13.8") with 2 ball
joints. Ball joint stud for rudder arm
requires 4.2mm dia hole and 5mm tap.
Figure 3-6 RF300 Rudder Feedback - Dimensions
Figure 3-7 Transmission link - Dimensions