SMC Networks HRS012-A-10 Series User Manual

HRX-MM-N007
Chapter 4 Service Procedure
HRS Series 4.5 Replacement Procedure
4-29
 Mounting
1. Mount the fan. (Screw ×4)
2. Mount the condenser. Then, mount the fan motor cable. (Screw ×1)
Connect the pink cable to the left, black cable to the right.
3. Insert the fan motor cable to the compressor cable connector.
Black：No.1 Blue：No.3
BK is black, BL is blue.
4. Mount the ground wire(G5). (Screw ×1)
For the HRS030, fix the pump cable (1 place) and the compressor cable (5 places) to the
fan motor bracket with cable ties.
5. Mount the upper panel and the panels on both sides in reversed order of removal.

SMC Networks HRS012-A-10 Series Specifications

General

Brand	SMC Networks
Model	HRS012-A-10 Series
Category	Chiller
Language	English