Snom C520 - Before Use

5 6
Before use
Check for dial tone
• Press . If you hear a dial tone, and see that the status indicator turns green
on the base unit, the installaon is successful.
If you do not hear a dial tone:
• Recheck the installaon diagram and the connecons to the unit.
• Ensure the unit is correctly congured with the correct SIP account informaon.
For more informaon, see the C520 Administrator and Provisioning Guide.
• Consult your service provider if you require addional user accounts or if you
suspect a service disrupon is at fault.
Operang range
The maximum range between the conference phone and its wireless microphones and
any connected speakerphones can vary, depending on their locaons and the layout of
your oce.
When a wireless microphone is out of range, it must be returned to the charging cradle
to be able to reconnect with the phone.
If there is an incoming call while the wireless microphone is out of range, its green call
LED will not ash to indicate an incoming call. If the wireless microphone is moved
out of range during a telephone conversaon, there may be interference. To improve
recepon, move it closer to the conference phone.
Geng Started