49 50
Note: Registraon can be terminated by pressing on the C520.
Deregistering a cordless headset
You must deregister a cordless headset from its original phone before you can register it to a
dierent phone.
To deregister a cordless headset:
1. When the phone to which the headset is registered is idle, press .
2. From the Main Menu, press q to highlight User Sengs, and then press .
3. From the User sengs menu, press q to highlight DECT Headset, and then press
.
The DECT headset menu appears.
4. From the DECT headset menu, press q to highlight Deregister, and then press
Select
.
The phone screen displays "DECT headset is deregistered."
The DECT headset menu appears.
Deregistering the cordless headset without the C520
Cordless headsets can also be deregistered using the headset. You can use this method
when you cannot use the deskset for standard deregistraon. The C520 may be out
of range or may have been removed from the system. Check your headset manual for
deregistraon instrucons applicable to your model.
Cordless accessory registraon and deregistraon me-out
If the cordless device is registered to another telephone, it must be deregistered rst.
See "Deregistering a cordless headset", above.
For security reasons, the registraon process on both the phone and the cordless
accessory terminates aer the me-out period of two minutes if registraon is not
successful.
If the registraon process mes out on the cordless accessory, the cordless accessory
resets itself. If the registraon process mes out on the phone, it displays "Registraon
Failed" and returns to Idle mode.
If cordless headset registraon fails, li the headset out of its charging base, place it
back in the charger, and try the registraon process again.