Snom C520 - Using a Wireless Microphone During a Call; Ending the Call

15
Making a call in idle mode or with call(s) on hold:
1. Enter the phone number on the keypad.
• Press
Backspc
to delete an incorrect digit.
• Press
123
to change from entering digits to entering leers
abc
(if you need to enter a domain name as part of the number). In leer mode,
press
a » A
or
#
to enter symbols. For example, press
a » A
twice for the
@ symbol.
a » A
: Press once to enter the dot (.), twice to enter @, three mes to enter an
asterisk (*).
#
: Press one to 11 mes to enter parentheses (), square brackets [], curly
braces {}, angle brackets <>, the slash /, the backslash \, and the pound/
hash sign #.
• Press t or u and
Redial
to view the list of previously dialed numbers.
2. Dial the number by pressing or
Dial
.
When the call is answered, the acve call screen appears.
Note that the default acve call screen so keys are shown above. Your phone’s
so keys are programmable and may dier from what is shown here.
Using a wireless microphone during a call
1. Take the wireless microphone from the phone's charging cradle and place it on the
table near the intended speaker(s).
2. Speak towards the microphone.
• For best performance, the person speaking should be at a distance of
less than 3 feet (90 cm) from the microphone.
• Always return the wireless microphones to the charging cradles aer use.
Ending the call
To end the call, press or
End
.
Conference phone operaon