Snom C520 - Making and Receiving Calls on Cell Phone

25
Making and receiving calls on cell phone
You can connect up to two cell phones via Bluetooth and use them to make calls; the
cell phone audio will be routed through the C520.
Adding or connecng a cell phone to the C520: See "Using the Bluetooth menu"
on page 33.
Making calls from connected cell phone
1. From the idle screen, press the funcon key underneath
Device 1
or
Device 2
,
depending on which cell phone you want to use. Note: Instead of "Device 1" or
"Device 2", respecvely, the sokey will show the name of the device as it appears
on the "Device" list.
2. Use the keypad to enter the phone number you want to dial.
3. Press
Dial
.
You can also enter the number rst and then press
Device 1
or
Device 2
to dial it with
the cell phone. You may need to press t or u to put the so keys onscreen.
Answering calls to the cell phone
When a cell phone is connected to the C520, incoming calls to the cell phone can be
answered on the C520.
Note: You can have concurrent cell phone and SIP account calls (one call will be on
hold while the other call is acve) on the C520, but you cannot have more than one
cell phone call.
• On the conference phone, press or the funcon key underneath
Answer
.
• If you have another incoming call on the cell phone, press
Swap
to answer the
new call.
â
Conference phone operaon