Snom C520 - Page 56

45
Seng the date format that appears on the idle screen:
1. From the Date & Time menu, press q to highlight Clock date.
2. Press t or u to select the desired date format (DD/MM/YY, MM/DD/YY,
YY/MM/DD)
3. Press
Save
.
Seng the Time Zone:
1. From the Date & Time menu, press q to highlight Time Zone.
2. Press
Edit
.
3. Press q or p to select a me zone.
4. Press
Save
.
Seng DST:
1. From the Date & Time menu, press q to highlight DST.
2. Press t or u to select Enabled or Disabled.
3. Press
Save
Enabling and disabling the NTP (Network Time Protocol) server:
1. From the Date & Time menu, press q to highlight NTP server.
2. Press t or u to select Enabled or Disabled.
3. Press
Save
.
Note: If the NTP server is disabled, you must manually set the me and date. This
seng is valid only if the system administrator has already congured the Network
Time sengs. For more informaon, see the C520 Administrator and Provisioning
Manual.
Manually seng the Year, Month, Day, Hour and Minute:
1. From the Date & Time menu, press q to highlight Set manually.
2. Press .
Note: If the NTP server is enabled, the manual sengs cannot be accessed; a
message appears on the display informing you that date and me cannot be
edited.
3. For each seng, press t or u to select the desired seng, and then press q to
move to the next line.
4. When you have nished, press
Save
.
Conguring the Phone