13
Screen Contrast
The screen contrast is adjustable, allowing the user to vary the contrast for improved clarity in all conditions. To
adjust contrast: With the transmitter on and in the main menu, press and hold the select key. Then pressing the
INCREASE or DECREASE key will lighten or darken the contrast.
Advanced Digital Trims
The DX7 employs digital trim levers on aileron, elevator, throttle, and rudder. (Hover pitch and hover throttle
for helicopters). The ADT (Advanced Digital Trim) feature is designed to automatically store the selected trim
values for each model. When a different model is selected, the previously stored trim positions for that model are
automatically recalled.
When using the helicopter program, each flight mode has its own trim that is automatically recalled each time
that flight mode is entered.
Visual trim positions are displayed on the main screen. The trims feature dual speed scrolling. Holding the trim
lever for an extended time will cause the trim rate of change to increase.
To Next Page
Loading...
