Spektrum DX7 User Guide

78 SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
List Modes
The list mode screens display all the functions onscreen, allowing the access of any function without having to
scroll through each screen. Note that there are two list modes: a System Setup list mode that displays all the
system setup functions and a Function list mode that displays all the system programming functions.
To enter the System Setup List Mode, with the system on and in any System Setup function, press the UP and
SELECT keys simultaneously.
To enter the Function List mode, with the system on and in any function mode screen, press the UP and
SELECT keys simultaneously.
In either List Mode, pressing the UP and DowN keys will move the cursor to the desired function. Then
pressing the DowN and SELECT key simultaneously will access the selected function.
[FUNCTION LIST]
º
D/R & EXP
º
AUTO D/R
º
SWASH MIX
º
REV. SW
º
SUB TRIM
º
TRAV ADJ.
◊PI CURV ST1
º
THRO HOLD
º
TH CURV NOR
º
TH CURV ST1
º
TH CURV ST2
º
PI CURV NOR
INCREASE and DECREASE keyUP and DOWN key
SELECT key CLEAR key
[FUNCTION LIST]
º
PI CURV ST2
º
PROG.MIX2
º
REVO. MIX
º
GYRO SENS
º
PROG.MIX1
º
PROG.MIX3
º
TIMER
◊MONITOR
INCREASE and DECREASE keyUP and DOWN key
SELECT key CLEAR key

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g