Spektrum DX7 - Dual Rate and Switch Select; To Activate Dual Rate and Switch Select

45SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Dual Rate and Switch Select
The D/R switch select function allows the dual and expo rates to be selected via individual switches (aileron,
elevator and rudder D/R switches) or to be conveniently combined on a single switch. When combined to a
single switch the following switch options are available:
• COM AILE: Aileron D/R switch
• COM ELEV: Elevator D/R switch
• COM RUDD: Rudder D/R switch
• FLAP 2: Flap switch in the lower position
• FLAP 0: Flap switch in the upper position
• INDIVID: D/R activated by it’s individual aileron, elevator and rudder switches
[D/R SWITCH SEL]
≥INDIVID
Press to change selection
Press to enter
D/R SWITCH SELECT
Hold while turning on the transmitter
To Activate Dual Rate and Switch Select
Press and hold the DowN and SELECT keys simultaneously to enter system mode.
Press the UP or DowN key until D/R SWITCH SEL appears on the screen.
Press the INCREASE or DECREASE keys to select the desired switch(es) you wish to operate the
D/R and Expo function.