23
Helicopter Quick Start
The following covers a basic 5-channel mechanical mix helicopter with single rate. For more details on
programming for the helicopter mode, see the Helicopter section of this manual.
Model Type Selection
Selecting Helicopter Mode
Press the DowN and SELECT keys simultaneously and hold while turning on the transmitter to enter system
set up mode.
Press the UP or DowN button until TYPE SELECT appears on screen.
If HELI is highlighted on screen, proceed to SERVO REVERSING. (Page 24)
If ACRO is highlighted, press the INCREASE or DECREASE key once and heli should be highlighted.
Press the CLEAR key to accept the model type change.
SPEKTRUM DX7 • HELICOPTER QUICK START GUIDE