Spektrum DX7 - Reverse Switch; To Access the Reverse Switch Mode

48 SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Reverse Switch
The Reverse Switch function allows electronic means of reversing the servo’s throw. Servo reversing is available
for all seven channels.
[REVERSING SW]
NORM
GEAR
≤
ch 1 2 3 4 5 6 7
REV.
Press to select REV. or NORM
Press to enter REVERSE
Press to enter
Function Mode
Press to select
desired channel
To Access the Reverse Switch Mode
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the Reverse screen.
Press the SELECT key to access the desired channel.
Press the INCREASE or DECREASE keys to reverse the servo direction for that selected channel. The channels
available are:
• THRO: Throttle
• AILE: Aileron
• ELEV: Elevator
• RUDD: Rudder
• GEAR: Retractable Landing Gear
• FLAP: Flap
• AUX2: Auxiliary 2