Spektrum DX7 - System Setup Mode; To Enter the System Setup Mode; To Exit the System Setup Mode

66 SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
System Setup Mode
Includes programming functions that are normally used during setup. System Setup
programming functions include:
MODEL 1
10.6V
SPEKTRUM DX7 2.4GHz
INCREASE and DECREASE key
UP and DOWN key
Hold while turning on transmitter CLEAR key
To Enter the System Setup Mode
• With the power switch off, press and hold the DowN and SELECT keys simultaneously.
• Turn on the power switch.
• The system will display the last system setup screen that was used.
To Exit the System Setup Mode
• Press the DowN and SELECT keys simultaneously.
• The main menu will be displayed
• Or turn the transmitter off to exit the System Setup Mode.
[MODEL NAME]
MODEL 1 HELI
DSM <T-REX450>
≥
[MODEL SELECT]
◊SELECT
MODEL 1 T-REX
HELI DSM
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
[MODEL RESET]
MODEL 1 HELI DSM
◊DATA RESET
INTEG-T
0:00:34
[SWASH TYPE]
1 SERVO
NORM
[THRO RECOVERY]
INH
[INPUT SELECT]
≥AUX2 GEAR
GYRO INH
[TRAINER]
≥NORMAL
SW:L-ROCKER
Model Select (Page 67)
Model Name (Page 68)
Type Select (Page 69)
Model Reset (Page 70)
Swash Type (Page 75)
Input Select (Page 73)
Throttle Recovery
(Page 72)
Trainer (Page 71)