Spektrum DX7 - Assigning an Offset

94 SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Programmable Mixing 1–3 (continued)
[PROG.MIX1]
THRO≥ THRO ON
◊
RATE: 0%
0%
SW:ON
OFFSET: 0
Press to adjust OFFSET value
Press to enter PROG MIX
Press to enter
Function Mode
Press to return
value to default
Press to
highlight OFFSET
Assigning an Offset
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN keys to select the desired PROG. MIX screen (1–3).
Press the SELECT key to highlight OFFSET.
Move the master channel’s stick to the desired offset position and press the CLEAR key to store that
offset value. The stored offset value will appear onscreen.
To change the offset value, simply move the master channel’s stick to the desired position and press
the CLEAR button.