Spektrum DX7 User Guide

74 SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Input Select (continued)
[INPUT SELECT]
AUX2 ≥GEAR
INH INH
INCREASE and DECREASE key
Press to enter
INPUT SELECT
Hold while turning on transmitter Press to reset
To Select the Function for the Gear Channel
Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP or DowN key until INPUT SELECT appears on screen.
Press the SELECT key until GEAR is highlighted.
Press the INCREASE or DECREASE key to select the desired function.
The gear channel options are:
INH:
Inhibit is selected if the gyro function will not be used on the gear channel. Selecting inhibit turns off the gear
channel, allowing it to be used as a slave channel for mixing.
GEAR:
Gear is selected if the gyro gain or retractable gear position is to be selected using the gear switch.
GYRO:
Gyro is selected under gear if you wish to have the Gyro Sensing (Page 91) operate using the
gear channel.
AUX2:
The Auxiliary 2 switch is used to activate the gear channel.

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g