39SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Wing Type
The DX7 offers three different wing types to choose from: Normal, Flaperon and Delta (also called elevon
mixing). In addition, V-Tail mixing is available from the Wing Type screen.
Normal
When the Flaperon and Delta wing function are off, Normal wing type is selected. Use this wing type with
common aircraft that utilize only one servo for both ailerons. Normal is the default setting.
Flaperon Wing Type Selection
Flaperons require the use of one servo for each aileron and allow the use of ailerons as flaps or spoilers. This
function also allows the precise independent adjust of up and down travel, and independent sub-trim and
differential of each aileron.
Delta Wing Type Selection
Delta wing arrangements combine the function of ailerons with the function of the elevator to allow precise
control of both roll and pitch.
To Enter the Wing Type Function
Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until WING TYPE function appears on screen.