Spektrum DX7 - Model Select;Copy; To Enter the Model Select Function; To Enter the Copy Function

67SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Model Select/Copy
The DX7 features a memory function that stores the programmed data for up to 20 models. Any combination of
up to 20 airplanes and/or helicopters can be stored in memory. A model name feature with up to eight characters
allows each model to be easily identified.
[MODEL SELECT]
◊SELECT
MODEL 1 T-REX
ACRO DSM
INCREASE and DECREASE key
UP and DOWN key
Hold while turning on transmitter
To Enter the Model Select Function
Press the DowN and SELECT keys simultaneously and turn the power switch ON to access the System Setup
Mode. Press the INCREASE or DECREASE key until the MODEL SELECT screen appears.
Press the INCREASE or DECREASE key to select the desired model memory.
[MODEL SELECT]
MODEL 1
HELI DSM
MODEL 2
ACRO DSM
◊COPY
≥
INCREASE and DECREASE key
Press to select
MODEL SELECT
Press to enter
function main screen
Press to enter
COPY screen
Press to copy
selected model
To Enter the Copy Function
• Press the DowN and SELECT keys simultaneously and turn the power switch ON to access the
System Setup Mode.
• Press the UP or DowN key until MODEL SELECT appears on screen.
• Press the SELECT button to enter the COPY screen.
• Press the INCREASE or DECREASE keys to select to model that you wish to copy the model to.
• Press the CLEAR key to copy the model to the selected model memory.
Note: Be aware that the model that you copy to will have its memory replaced with the new
model and the programming information for that model will be erased.