20
Airplane Quick Start
The following covers a basic 4-channel airplane with a single rate. For more details on programming for the
aircraft mode, see the Aircraft section of this manual.
Model Type Selection
Selecting Airplane Mode
Press the DowN and SELECT keys simultaneously and hold while turning on the transmitter to enter System
Setup mode.
Press the UP or DowN button until TYPE SELECT appears on screen.
If ACRO is highlighted on screen, proceed to SERVO REVERSING. (Page 21)
If HELI is highlighted, press the INCREASE or DECREASE key once and ACRO should be highlighted.
Press the CLEAR key to accept the model type change.
SPEKTRUM DX7 • AIRCRAFT QUICK START GUIDE