Assigning an Offset
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN keys to select the desired PROG. MIX screen (1–6).
Press the SELECT key to highlight OFFSET.
To establish the offset position, use the INCREASE or DECREASE keys to change the value to the desired
point. The stored offset value will appear onscreen.
To change the offset value, simply use the INCREASE or DECREASE keys to change the value. Pressing the
CLEAR button will reset the offset to 0.
Assigning a Switch
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN keys to select the desired PROG. MIX screen (1–6).
Press the SELECT key to highlight SW.
Use the INCREASE or DECREASE keys to select the desired switch to turn on/off the mix.
• ON: Mixing Always On
• MIX: Mixing Switch Toward Self
• Flap 0: Flap Switch in Flap 0 Position
• Flap 2: Flap Switch in Flap 2 Position
• Gear: Gear Switch