Spektrum DX7 - To Enter the Copy Function

32 SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Model Select/Copy Function (continued)
[MODEL SELECT]
MODEL 1 EXTRA 300
ACRO DSM
MODEL 2
ACRO DSM
◊COPY
≥
INCREASE and DECREASE key
Press to select
MODEL SELECT
Hold while turning
on transmitter
Press to enter
COPY screen
Press to copy
selected model
To Enter the Copy Function
Press the DowN and SELECT keys simultaneously and turn the power switch ON to access the
System Setup Mode.
Press the UP or DowN key until Model Select appears on screen.
Press the SELECT button to enter the COPY SCREEN.
Press the INCREASE or DECREASE keys to select the model that you wish to copy the model to.
Press the CLEAR key to copy the model to the selected model memory.
Note: Be aware that the model you copy to will have its memory replaced with the new model’s
memory, and the programming information for the model to be copied to will be erased.