Spektrum DX7 User Guide

30 SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
System Setup Mode Flowchart
The list mode screens display all the functions onscreen allowing the access of any function without having to
scroll through each screen. Note that there are two list modes: a System Setup List Mode that displays all the
system setup functions, and a Function List Mode that displays all the system setup functions.
System Mode includes programming functions that are normally used during set up. System programming
functions for airplanes include:
[MODEL SELECT]
◊SELECT
MODEL 1
ACRO DSM
Hold while turning on transmitter to enter System Mode
To Enter the System Setup Mode
• With the power switch off, press and hold the DowN and SELECT keys simultaneously.
• Turn on the power switch.
• The system will display the last screen that was used in system set up mode. You are now in
System Mode.
To Exit the System Setup Mode
• Press the DowN and SELECT keys simultaneously. The main screen will be displayed.
• Turn the transmitter off.
[MODEL NAME]
≥
MODEL 1 ACRO
DSM <EXTRA 300>
[MODEL SELECT]
◊SELECT
MODEL 1
ACRO DSM
[TYPE SELECT]
MODEL 1
HELI
◊ACRO
[TRAINER]
≥INH
[MODEL RESET]
MODEL 1 ACRO DSM
◊DATA RESET
INTEG-T
0:00:34
[D/R SWITCH SEL]
≥INDIVID
[WING TYPE]
≥FLAPERON OFF
DELTA OFF
V-TAIL OFF
[THRO RECOVERY]
INH
[INPUT SELECT]
≥AUX2:2P SW
AUX2 TRIM:INH
FLAP:SYSTEM
FLAP TRIM:ACT
Model Select (Page 31)
Model Name (Page 33)
Type Select
(Page 34)
Model Reset (Page 35)
Trainer (Page 36)
Dual Rate Select Switch
(Page 42)
Wing Type (Page 39)
Input Select (Page 38)
Throttle Recovery
(Page 37)

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g