Spektrum DX7 User Guide

22
Travel Adjust
[TRAVEL ADJUST]
THRO
≥H 100%
L 100%
ELEV
D 100%
U 100%
AILE
L 100%
R 100%
RUDD
L 100%
R 100%
Press to adjust valueSelected channel
Press to enter
TRAVEL ADJUST
Press to enter
Function Mode
Press to return
value to default
Press to select
desired channel
To Access Travel Adjust
Turn the power on and press the DowN and SELECT keys simultaneously to enter the function mode.
Press the UP or DowN key until TRAVEL ADJUST appears on screen. Press the select key to move the cursor
arrow to the desired channel.
Use the SELECT key to choose the appropriate channel that you wish to adjust.
While holding the channel or switch in the desired direction, press the INCREASE or DECREASE key to adjust
the travel adjust in that direction.
This completes the basic Quick Start setup for your airplane. For additional features like Dual and Expo rates,
Mixing, etc, see the appropriate pages listed in the table of contents.
Note: If your airplane’s ailerons are controlled independently by two servos, see “Wing Type
Selection” on Page 39 for specifics on programming flaperons.
SPEKTRUM DX7 • AIRCRAFT QUICK START GUIDE

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g