59SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Timer
The DX7 features an onscreen timer with three programming options:
INH:
Inhibit- In this mode the timer is turned off.
Down-T:
Down Timer- The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50
seconds to be programmed, and when that time expires, a beeper will sound for 10 seconds.
STOP-W:
Stopwatch- The stopwatch function is a simple count-up timer that that displays minutes and seconds up to 59
minutes and 59 seconds.
When the DOWN-T or STOP-W function is selected, the timer will be displayed on the main screen. The
following buttons are used in conjunction to operate the timer function:
INCREASE or DECREASE keys:
Used to start, stop and restart the timer.
CLEAR key:
Used to reset the timer to the preset time (Down-T) or to reset the stopwatch timer to 0:00.