Spektrum DX7 - Auto Dual Rate EXP; To Adjust the Auto Dual Rate

81SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Auto Dual Rate EXP
The Auto Dual Rate and Expo function allows Expo and Dual Rate values (aileron, elevator and rudder) to be
automatically selected in each flight mode (Normal, ST1, ST2, and Hold.) When an auto dual rate flight mode is
inhibited, the dual rate is defaulted to the correlating switch and dual rate switch positions.
[AUTO D/R EXP]
◊NORM INH
ST-1 INH
ST-2 INH
Press to adjust value
Press to enter
AUTO DUAL RATE
Press to enter
Function Mode
Press to select
desired flight mode
Press to return value
to default setting
To Adjust the Auto Dual Rate
Press the DowN and SELECT key simultaneously to access the Function Mode.
Press the UP or DowN key until the AUTO D/R EXP screen appears on screen.
Use the select key to select NORMAL, ST1 ST2 or HOLD FLIGHT mode.
When selected, press the INCREASE or DECREASE key to select DUAL RATE, P-1, P-2 or INHIBIT.
Note: The actual dual rate values are set in the Dual Rate and Expo screen. See Page 79.