Spektrum DX7 User Guide

51SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Elevator-to-Flap Mix Function
When the Elevator-to-Flap Mixing System is active, and a value of flaps is input, the flaps will be deflected each
time the elevator stick is used. The actual flap movement is independently adjustable for both up and down
elevator. A commonly used application is up elevator/down flaps and down elevator/up flaps. When used in this
manner, the aircraft pitches much more quickly than normal. The uppermost position of the Flap Mixing Switch
or the Mix Switch can be used to activate the Elevator-to-Flap Mixing function. When you want to reverse the
mixing directions, press the - key and change the mixing value from + to - (or - to +).
[ELEV->FLAP MIX]
◊RATE:≥D 0%
ON
U 0%
SW:FLAP0
Press to adjust value
Press to enter
ELEV-FLAP MIX
Press to enter
Function Mode
Press to select
Rate or Switch
To Access the Elevator-to-Flap Mixing
In the Function Mode, use the UP or DowN key to select the ELEVATOR TO FLAP MIXING function and
access by pressing the UP and DowN keys simultaneously.
Note: The flap mix switch, or the Mix switch, depending on which is selected, must be in the
“ON” position to adjust values.
To adjust the rate value, with the switch on, move the elevator stick in the desired position up or down and press
the INCREASE or DECREASE button to adjust the desired mix value.
To Select the Switch to Operate the Flap Mix
Press the SELECT key to highlight SW.
Press the INCREASE or DECREASE key to select the MIX or FLAP0 switch position.

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g