Spektrum DX7 User Guide

86 SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Throttle Hold
The Throttle Hold function is used to practice autorotation and is often use as a safety switch for electric
helicopters, holding the throttle in the off position. When the throttle hold switch is activated, the throttle hold
function holds the throttle servo/ ESC in a specific position (normally low or off throttle) while all other servos
function normally. The throttle hold switch is also selectable. Switch selection options include rudd D/R, gear,
AUX2, aileron D/R or elevator D/R.
[THRO HOLD]
◊SW:RUDD D/R
HOLD POS. -5.0%
OFF
Press to activate THROTTLE HOLD
and change values
Press to enter
THROTTLE HOLD
Press to enter
Function Mode
Press to return
value to INH
Press to select
desired channel
To Access the Throttle Hold Function
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the THRO HOLD screen.
Press the INCREASE or DECREASE key to activate the throttle hold function.
When activated, press the INCREASE or DECREASE key to change the throttle hold value.
To Access the Throttle Hold Switch Function
Press the SELECT key to highlight switch.
Press the INCREASE or DECREASE key to select the desired switch.

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g