23
3. If this is not the entry you wish to delete, you can press the key to enter another Pager ID in the ID field.
If this is the entry you wish to delete, press the key. A new screen is shown prompting to confirm
deletion of this Pager ID as shown below:
ID[1 ] DELETE
(Send confirms)
4. If you wish to delete this Pager ID, press the key again and the screen displays Pager Deleted.
5. If you do not wish to delete that Pager ID from the database, press any key on the keypad, and you are
returned to the Pager Menu without deleting it.
6. To return to Normal Mode, press the key three times to exit out of all menus. MAXPage then restarts
and is ready for use.
Groups
You need to register a group in the database before you can send messages to it.
1. At the User Mode menu screen, press to select Pagers followed by Groups. From here you can
choose between the following menu options. This is referred to as the Group Menu.
NOTE: MAXPage is capable of storing a maximum of 20 groups, each with up to 10 members.
1.Add/Edit Group
2.Delete Group
Adding or Editing a Group
1. To add or edit a group, press to select Add/Edit Group from the Group Menu. The following screen
displays:
ID[ ]
Rotary[ ]
2. Enter the Group ID for the group using the keypad. This is the ID of the group.
3. Press the key to move along to the next field. If the Group ID is being used by a pager, MAXPage
displays “ID Used by Pager.” If the Group ID is a group that already exists in the database, the details for
that ID are displayed in the fields. If the Group ID is not in the database, all fields are ready for data entry.
NOTE: A Group ID is a reference number that identifies a group in the database.
ID[1 ]
Rotary [ ]
4. The next field is Rotary. Using the keypad, choose between Y or N (Yes or No). Once you have entered
the required option, press the key to move to the next screen.
a. Select Y to enable the rotary function. The rotary function is a special mode whereby when a message
is sent to the group, one user at a time receives a message. For example, if there are three recipients in a
group and a message is sent, only the first pager in the group gets the first message. The next message
that is sent to the group goes to the second pager and the third message sent goes to the third pager in
the group. If a fourth message is sent to the group, the cycle repeats.
To Next Page
Loading...