Steketee EC-WEEDER - Page 68

Depending on the machine equipment, three applications are possible
for the manual lifting and lowering of the hoeing elements Section
Control:
Pressure only Lifting only Pressure and lifting
Hydraulic hose at the ram: Top Bottom Top and bottom
Lift: –
(Lift the hoeing machine
as a whole using the
tractor hydraulics.)
Lift the hoeing elements
hydraulically.
Lift the hoeing elements
hydraulically.
Lower: Lower the hoeing ele‐
ments with pressurisation.
Pressure adjustment in
Section Control: 15–50 kg.
Lower the hoeing ele‐
ments without pressure
using their dead weight.
Lower the hoeing ele‐
ments with pressurisation.
Pressure adjustment in
Section Control: 15–50 kg.
Requirements on the
hydraulic system:
1 x SA LS + P + T
1 x DA or
1 SA + T
LS + P + T
1 x DA or
1 SA + T
INFORMATION
Pressurisation during lowering is used to cultivate hard
soils.
On soft soils, the dead weight of the hoeing elements is
sucient.
Applications
Operation
en-GB | Item no. 17513597 | BA 02/05-2022 62