5 Operation
Handling the battery
Fire prevention measures
WARNING
Do not smoke or use a naked flame
when handling batteries. In the
area designated for parking the
truck to recharge the battery or
battery charger, there should be no
flammable materials or substances
that can cause sparks within a radius
of at least 2 metres. The charging
area must be well ventilated. Keep a
fire extinguisher at hand.
Safe parking
Park the truck securely before carrying out
work on the battery. The truck can only be
operated when the battery cover is closed
and the battery outlet is inserted. If the truck
is enabled for side removal of the battery, the
truck can only be operated once the battery
is fixed in place properly using the battery
locking system.
Battery weight and dimensions
The battery weight and the dimensions affect
the stability of the lift truck. When changing the
battery, the weight ratios must not be changed.
Ballast weights must not be removed and their
position must not be changed.
Take note of the description of batteries that
can be used; see ⇒ Chapter "Datasheet
(VDI)", P. 7-141.
Notes on charging the battery; see ⇒ Chap-
ter "Servicing the battery", P. 6-117.
– Follow steps in reverse order to reinstall and
connect the charged battery. Ensure that all
covers are correctly installed.
Damage to cables
CAUTION
When removing and reinstalling the battery, make
sure not to damage the battery cables.
96
50108043405 [EN]
To Next Page
Loading...
Need help?
General
