5 Operation
Handling loads
1044_001-016
Entering lifts
The driver may only enter lifts with a sufficient
load capacity and with the permission of the
operator. Inside the lift, the truck must be
secured so that no part of it will come into
contact with the wall of the lift shaft.
The maximum weight of the truck (dead weight
with maximum load ) is:
Max. weight
3120 kg
.
1044_001-017
Driving on loading bridges
Before crossing a loading bridge, the driver
must satisfy himself that it is properly attached
and secured and has a sufficient load capacity.
Cross the bridge slowly and carefully. The
driver must be sure that the vehicle to be
entered is secured sufficiently against moving
and that it can bear the load of the truck.
82
50108043405 [EN]
To Next Page
Loading...
Need help?
General
