5 Operation
Commissioning
DANGER
DO NOT use the truck, but call the technical service
department, if you notice any malfunctions or if you
have any doubts about its correct operation.
Connecting the battery plug (charg-
ing station)
1044_606-013
1
– Disconnect the battery socket (1) from the
charging station and insert into the plug on
the truck.
Commissioning
123
456
789
PRG
PRG
1044_505-007
Turningonthetruck
NOTE
The pallet truck is equipped with a digital
control and is taken into operation by entering
a driver code. The driver code consists of four
figures and is assigned by the pool manager.
It is used for normal use and operation of
the truck by the driver and operator. The
knowledge of the code is like a key and should
not be misused. Do not tell third persons your
driver code except if expressly ordered to do
so.
– Other codes can be entered, ⇒ Chap-
ter "Digicode control ", P. 5-85.
58
50108043405 [EN]
To Next Page
Loading...
Need help?
General
