Still CX - Adding the Master Code

5 Operation
Using the Digicode control
Service code
The service code is only intended for the
after-sales service. It allows the diagnosis
of the truck for inspections and the access to
the driver’s and master code.
Adding the master code
NOTE
The pallet truck is turne
d off, the battery is
connected.
123
456
789
PRG
PRG
1044_505-009
1 2
3
4
5
6
–Pressthe
I
(ON) button (5).
– Enter a valid 4-digit master code with the
buttons
123
(1),
456
(2) and
789
(3).
7
1044_505-010
– Scroll with the
PRG ↑
(scrolling) button (6)
until
Pin (7) appears in the display.
10
1044_505-011
–Confirmwiththe
PRG ↲
(enter) button (4)
until
Add (10) appears in the display.
86
50108043405 [EN]