6 Maintenance
Maintenance safety instructions
Maintenance safety instructions
Safety measures for maintenance
and repair
To prevent accidents during maintenance and
repair, perform all necessary safety measures
such as:
– Ensure that the truck is secured against in-
advertent movement or accidental starting
(disconnect the battery connector).
Work on the electrical equipment
Work on the electrical equipment of the truck
is only allowed with the electrical system dead.
Function checks, inspections and adjustments
on live parts may only be carried out by trained
and authorized staff under observance of
suitable precautions. Rings, metal bracelets,
etc. must be removed before working on
electric components.
To prevent damage to e
lectrical equipment
with electronic comp
onents such as an
electronic travel co
ntrol, remove them from
the vehicle before do
ing any electric welding.
Safety devices
Refit and check all s
afety devices for proper
operation after ma
intenance and servicing.
Settings
Retain the vehicl
e-specific settings when
repairing and rep
lacing hydraulic and electric
components. The
y are specified in the
appropriate sec
tions.
Preparatory t
asks for maintenance
Lifting and ja
cking up the truck
When jacking
up the truck, components and
attachments
, the lifting tackle may only be
attached at t
he designated points. When
11
2 50108043405 [EN]
To Next Page
Loading...
Need help?
General
