Still CX User Manual

5 Operation
Commissioning
9
1044_505-017
%
10
– The number is deleted, the flashing line
cursor (9) appears again. The code number
can be re-entered.
– After the 4th number is entered, confirm the
input by depressing the
PRG ↲
button (5).
The manufacturer’s name appears briefly
in the display. The pallet truck can now be
operated.
NOTE
If an error code such as E38
0
(10) appears,
shut the truck off by press
ing button (6) and
repeat the start-up as des
cribed in the chapter
"Operation of the Digico
de control", section
"Error Code".
NOTE
The following informat
ion can be displayed by
depressing the
PRG ↑
(scroll
ing) button (7)
repeatedly.
• Hour meter⇒ Chapter "Hour meter", P. 5-61
• Battery charge⇒ Chapter "Battery
charge", P. 5-61
• Display of time to next
servicing⇒ Chap-
ter "Display of time to
next servic-
ing",P.5-62
123
456
789
PRG
PRG
1044_505-001
1 2 3 4
5
6
7
Starting with Flee
tManager (op-
tional)
– Push the
I
key (START
) (6). Do not pay
attention to the
Co
de
alert that appears in
the display
– Start the truck directly via the FleetManager
keyboard or reading device, depending on
the version.
60
50108043405 [EN]

Still CX Specifications

General

Brand	Still
Model	CX
Category	Forklifts
Language	English