4 Overview
Options and variants
CX
20/CX-H
CX-D 20
Optional
Dimensions
Fork end pieces With input/output sliding sh
oes
Optional –
Type with rubber buffer, 165 mm high, fitted
on the drive area
Optional Optional
Bumpers
Type with a metal guard, 545 mm high, fitted
on the drive area
Optional Optional
Metal battery cover
For boot 97
Optional Optional
Padded backrest Standard Standard
Step plate
Folding, 400 mm high from the platform
Optional –
Lower drive area
Optional Optional
Upper drive area
Optional Optional
Front accessory bar
Upper with drive-a
rea-side bridge piece
Optional Optional
With forward/reverse gear and throttle
release in the cockpit
Optional Optional
With forward/reverse gear and throttle
release in the cockpit + forward/reverse
inching control using buttons on either side
of the backrest
Optional Optional
Pedestrian mode
With forward/reverse gear using buttons on
either side of the backrest
Optional Optional
Lower fork side
Optional –
Upper fork side Optional –
Rear access
ory bar
Upper with fork-side bridge piece
Optional –
Display Programm
able maintenance intervals
Optional Optional
With forks lowered
Optional –
at 6 km/h
Optional Optional
at 8 km/h
Optional Optional
Speed limitation
at 10 km/h
Optional Optional
750-mm lift with battery boot 97
Optional –
Platform
750-mm lift with battery boot 91
Optional –
Standard connected to travel and lifting
Standard Standard
Hour meter
Permanent reading standard connected to
travel and lifting
Optional Optional
For open lead-acid batteries with speed
limitation
Standard Standard
Combi/hour meter
For sealed batteries with speed limitation
O
ptional
O
ptional
50
50108043405 [EN]