Stratasys Objet260 - Page 204

Objet260 User Guide 6 Operating and Maintaining the Objet260 3DPrinter
DOC-37004 Rev.E 6-71
4. SelecttheUVlamp(s)tobereplacedandclickNext.
Figure6-108UVlampselectionscreen
5. DisconnecttheUV-lamppowerconnectorandtheUVheatfuse
connector.
Figure6-109DisconnectingtheUVlamp
Note:Donotdisconnectthepowerconnectiontothecoolingfans.