Struers LaboPol-30 - Page 5

8.1.6 The specimen mover 43
8.1.7 The flexible specimen holder 46
8.1.8 LaboDoser-100 with LaboForce-100 49
8.1.9 LaboDoser-10 with LaboForce-100 49
8.2 Operate the device 50
8.2.1 Control panel functions 50
8.2.2 Water tap 51
8.2.3 The spin function 52
8.2.4 The splash guard 52
8.2.5 The display 53
8.2.6 Main menu 53
8.2.7 Navigating in the display 54
8.2.8 Changing settings and text 54
8.2.9 Software settings 55
8.2.10 Configuration 55
8.2.11 Maintenance menu 59
8.3 The preparation process 60
8.3.1 Preparation modes 60
8.3.2 Starting and stopping the preparation process 64
9 LaboForce-Mi 66
9.1 Installation 67
9.1.1 Unpack the machine 67
9.1.2 Check the packing list 67
9.1.3 Installation - LaboForce-Mi 67
9.1.4 The specimen mover 68
9.2 Operate the device 70
9.2.1 Control panel functions 70
9.2.2 Water tap 71
9.2.3 The spin function 71
9.2.4 The splash guard 72
9.2.5 Inserting a specimen 72
9.2.6 Adjusting the force 72
9.2.7 Forced rotation of specimens 73
9.2.8 Manual preparation 74
9.2.9 Starting and stopping the machine 74
9.2.10 Removing the specimens 75
9.2.11 Changing the specimen mover plate 75
10 LaboDoser-10 76
10.1 Unpack the machine 77
LaboPol-30 5