Struers LaboPol-30 - Page 6

10.2 Check the packing list 78
10.3 Installation 78
10.4 Operating LaboDoser-10 80
10.5 Changing lubricant/suspension 80
11 LaboDoser-100 81
11.1 Installation 81
11.1.1 Unpack the machine 81
11.1.2 Check the packing list 82
11.1.3 Installing LaboDoser-100 82
11.2 Operating LaboDoser-100 83
11.2.1 Changing lubricant/suspension 83
11.2.2 Cleaning the tubes 83
11.2.3 Change the tubes 84
12 Maintenance and service 86
12.1 General cleaning 86
12.2 Daily 86
12.3 Weekly 86
12.3.1 LaboForce-100 - the specimen mover head 87
12.4 Monthly 87
12.4.1 LaboForce-50 - pressure feet 87
12.4.2 LaboForce-100 - Empty the water/oil filter 88
12.5 Annually 88
12.5.1 Test the safety devices 88
12.5.2 Emergency stop 89
12.6 Spare parts 90
12.7 Service and repair 90
12.7.1 Service check - LaboForce-100 90
12.8 Disposal 91
13 Troubleshooting 91
13.1 Troubleshooting - LaboPol-30 91
13.2 LaboForce-50 92
13.3 LaboForce-100 93
13.3.1 Messages and errors - LaboForce-100 93
13.4 LaboForce-Mi 96
14 Technical data 97
14.1 Technical data 97
14.2 Safety Circuit Categories/Performance Level 98
14.3 Noise and vibration levels 98
14.4 Technical data - equipment units 98
6 LaboPol-30