To Next Page

To Previous Page

2� Create a folder named SDC in the default path of the FTP Server� In this folder, create a folder

for the Username� For example, if you have anonymous FTP service running on a server with

an IP address of 10�2�101�26, and you have a folder called JOHND in the SDC folder in the

default path of the anonymous login, then you should enter 10�2�101�26 in the NETWORK

tab as the ‘FTP Address’ and JOHND as the ‘Username�’

3� Press the ADD button so that SDC3 remembers the username and the FTP Address in the

list� SDC3 can remember up to 500 usernames and FTP addresses�

4� Select the Write Videos checkbox on the NETWORK tab to write videos to the network�

5� Press the SAVE TO NETWORK button from the Save menu to save images and videos� On

the conrmation screen, check the Anonymous Login checkbox�

The SDC3 checks the server for a response� If it gets a valid response, it performs an anonymous

FTP login� It then changes directory to the directory corresponding to the current Username

(JOHND, in current example)� It does not create a new directory based on the Username� This

avoids creation of multiple directories if someone accidentally enters a wrong/invalid Username�

Therefore, you have to enter a Username for the FTP to work�

For Login with Username and Password

Note: The FTP server should be setup for the users who have access� Passwords should be all caps�

1� Create a folder under the root folder of the FTP server folder�

2� Create another folder under the SDC folder with the same name as the username�

Follow steps 3 - 5 above, except in step 5, uncheck the Anonymous Login checkbox and enter the

password�

Directory Structure

• <Default FTP path>\SDC\Username\?????MMDDYYYY_HHMMSS where, ?????: First 13

characters of the Patient’s Name / ID entered

• Username: Doctor’s Username which can be the same as his/her Notematic ID MMDDYYYY_

HHMMSS: Date/Time stamp to guarantee uniqueness

Note: If there are any problems writing the data:

• Check to make sure the read/write permissions of the FTP server are set�

• Make sure that the rewall settings on the server do not block the FTP port�

Stryker SDC3 User Manual

Other manuals for Stryker SDC3