19
6.3 Global Taskbar
The Global Taskbar is located along the bottom of the screen and provides quick access
to system functions, including system Volume, Mute, Setup, Save Preset, Support, Help,
Suite Power, and Private. It also displays the current time, when configured properly.
6.3.1 Volume Control
To adjust the volume, press down on and slide the volume slider either to the right or left
to turn up or down the volume, respectively. The volume can also be adjusted by
pressing the “++” button to increase or the “--” button to decrease.
To mute the sound, press the MMuuttee button. The MMuuttee button will remain
highlighted when it is active.
To unmute the sound, press the MMuuttee button again.
6.3.2 Setup
The Setup button allows access to the Software Configuration screens of the SwitchPoint
Infinity 3 Control System and the Video Network Hub, if present.
If the Sidne Voice Activation System or SDC3 Voice Package is configured to work with
the SwitchPoint Infinity 3 Control System, its configuration screen will be accessible
when the Setup button is pressed.
If the Setup button is selected, the “About Infinity” screen will appear. This screen
displays the Stryker Technical Support contact information, current Software Version,
Serial Numbers, Part Numbers, and the institution contact information provided for this
router. These screens should only be accessed by a Stryker representative or authorized
personnel. You will be prompted to enter a username and password for security
purposes. Note that the Setup screens can only be accessed from the local Touch Panel
interface of the SwitchPoint Infinity 3 Control System.
To Next Page
Loading...